Why PureFilter?
Certified Science – Now at Your Home!
Professional Filtration Technology, Now Available in Your Home.
With an under-sink installation system and a supply that fully meets your daily need for precious clean water... Because at PureFilter, we believe clean water isn’t a luxury... it’s a right.
We have the solution for every need of yours
Certifications
3-Stage
Filtration Technology
First stage
The pre-filter sheet reduces suspended substances such as sand, soil, network work residues and particulate contaminants such as rust.
Second stage
The compact activated carbon filter with bactericidal action and an absorption surface of over 1100 m² per gram reduces chlorine, disinfectant residues, heavy metals, and other organic chemical compounds for top-quality water, free of odors..
Third stage
The integrated ultrafiltration membranes filter at a microscopic level, smaller than 0.1 μm, capturing even the smallest particles, cysts, bacteria, and microplastics.
Filters the water, maintains the flow!
Ensures clean, fresh water without any drop in pressure.
Easy replacement
The filter is easily replaced with a single click, without the need to shut off the main water supply.
Installation in 5 minutes with simple tools
The installation is completed quickly, without the need for special tools or technical knowledge
Package Contents Check:
- 1 x Filter Head
- Blue LDPE Hose
- 2 x Quick Connect Fittings with Thread
- 1 x Parallel Bulkhead
- 4 x Pressure Safety Clips for Quick Connect Fittings
Shut off the water supply:
- Turn on the cold tap. Close the cold water valve (usually on the right).
- If water continues to flow, close the other valve.
Remove the spiral:
Unscrew the spiral from the valve using pliers or a wrench.
Installing the components:
Screw the bulkhead onto the end of the spiral.
Screw the first quick connect fitting onto the bulkhead.
Screw the second quick connect fitting onto the water valve.
Filter installation:
Remove the FX filter from the packaging.
Take off the plastic cap.
Place the filter into the head, rotating it until it "locks" into place.
Pipe connection:
Place the filter head upright at the desired location.
Cut the LDPE hose to the appropriate length.
Connect the hose:
Left: Connect to the quick connect fitting on the wall valve.
Right: Connect to the quick connect fitting on the spiral (as indicated by the arrow on the head).
Why PureFilter?
It combines technology, efficiency, and affordability, making it accessible to everyone.
FAQs
Of course! Both filters in our range are NSF certified for trapping microplastics.
It traps taste and odors (chlorine smells), particles & microplastics down to 0.1 micron, turbidity, cysts, bacteria (including E. Coli, Staphylococcus aureus, Pseudomonas aeruginosa, Cryptosporidium, and Giardia).
At PureFilter, we do not offer installation services. However, the installation is simple and can be carried out by any plumber of your choice. We, on the other hand, provide all the necessary components for a standard setup, ensuring quick installation of the filter between the wall valve and your faucet.
Every 12 months or based on water volume, whichever comes first. Specifically, for the FX-10, it's 30,000 liters, and for the FX-15, it's 60,567 liters. The filters are designed for hygienic use and can be replaced with a simple ¼ turn of the filter, after shutting off the water supply.
The FX-10 and FX-15 filters are slim and elongated, and are installed under the kitchen counter, saving valuable space. Specifically, their footprint is 9.4 x 10.9 cm, while their heights are 28.6 cm and 40.7 cm, respectively. These dimensions include the installation head. 40.7 cm respectively. These prices are with the installation head.
The FX-10 and FX-15 filters are installed between the wall switch and the faucet you already have. There's no need to install separate faucets
The FX-10 and FX-15 water filters provide an unobstructed water flow. The smaller FX-10 filter has a flow rate of 5.68 liters per minute, while the larger FX-15 offers 9.46 liters per minute, under standard conditions.
The FX water filters incorporate three distinct filtration technologies:
for progressive particle retention.
for antimicrobial properties.
for filtration down to 0.1 microns.
Daily PureFilter!
Clean water without microplastics!
Clean water without microplastics!